HARDINGE Older DV59 Metal Lathe Operator"s Manual

http://ozarktoolmanuals.com/wp-content/uploads/2016/12/1191.jpg
Number of Pages: 38


 

This is a reproduction, not a photocopy, of an original Hardinge Older Model DV-59 Metal Lathe Owner"s and Operator"s Instruction Manual. This manual contains installing and setting up this lathe. It contains lubricating instructions and instructions on making adjustments like the brake, compound slide, collet closer, etc.. The manual includes instructions on how to replace the drive belt. It also includes the specifications of the lathe and accessories available at the time for this Hardinge DV59 metal lathe.

 

Please note: We have the parts manual for this lathe as well, and if you have a newer version of the DV59, we have an operator"s manual for it as well. The main difference between the two is in the motor drive system.

 

Overview
I have collected this information for many years and have found the information they contain to be priceless in using and setting up the machines properly. I believe this manual will be a valuable resource of knowledge that will provide a lot of helpful information that is often hard to find. My manuals are not photocopies. I maintain a high standard of quality in my reproductions. Most of the manuals I reproduce look better than their originals. I have professionally digitally edited every page, and removed stains, wrinkles and handwriting. All of the manuals are printed on thick white paper to withstand shop wear and tear; they are then comb bound with heavy cover pages so they lie flat on the workbench. Better than a pdf download.

Save

Save

Save


Click here to see more:
http://ozarktoolmanuals.com/machinemanual/hardinge-older-dv59-metal-lathe-operators-manual/

Nardini TT-1230 E Metal Lathe

A gentleman contacted us from Canada about this green Nardini TT-1230 E Turn-Tru metal lathe. He just got it, and was needing some wiring diagrams. We had just the manual he needed for the Nardini TT-1230E with the wiring and parts diagrams. More information on it is below. The Nardini TT-1230 E  has a 12" swing with an 8" swing over the cross slide. The spindle bore 1 3/8" with a D1-3 Camlock spindle nose. Maximum spindle speed is 2,000 RPMs. The tailstock has a #3 MT. In 1986 the Nardini TT-1230E sold for $4,795, which is the equivalent to $10,493.13 today.

 



 

 

 Here"s a video of a similar machine:

 

[embed]https://www.youtube.com/watch?v=Wi5nomVQQyA[/embed]

 

[the_ad id="82670"]

 

 

 

 

 Owner"s Operator Instructions and Parts Manual

We carry a instructions and parts manual for this Nardini TT-1230 E at the link below. Nardini manuals are put together very well with all the information you would expect. It has the standard operating instructions with the maintenance and lubrication chart. The manual contains the wiring diagrams and information about making adjustments. The parts diagrams are all explosive view, and show the parts very clearly. This manual covers the TT-1020, TT-1030, TT-1220, TT-1230, TT-125 and TT-150 Turn Tru series.

 

NARDINI TT-1000, 1200, 125, 150 Operator’s Part Manual

Click on image of manual cover above.

 

We carry a lot of Nardini metal lathe manuals. If you have any questions about Nardini metal lathes, feel free to comment below or contact us.
 
[the_ad id="82670"]


Click here to see more:
http://ozarktoolmanuals.com/ozarkshoptalkblog/nardini-tt-1230-e-metal-lathe/

Sold our first big #metallathe we purchased new, and a #millingmachine. Making room for new lathe.

Our new lathe is a South Bend toolroom lathe. It is more suited for what we produce now in our shop, plus it has a lot more features that we wanted. Stay posted to see updates on it. 




Click here to see more:
http://ozarktoolmanuals.com/ozarkshoptalkblog/sold-our-first-big-metallathe-we-purchased-new-and-a-millingmachine-making-room-for-new-lathe/